Dactyl 36-key ("minidox")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 36-key version of the Dactyl Manuform (though the thumb cluster is different so it's not really a "manuform"…
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 1641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a 36-key version of the Dactyl Manuform (though the thumb cluster is different so it's not really a "manuform" - more like a "minidox").
Derived from: https://github.com/ibnuda/dactyl-keyboard/tree/coffin
Only parts for the right hand side are included, use the mirror function in your slicer to get the left hand side parts.
I recommend using Cura with tree supports - the supports from PrusaSlicer are practically impossible to remove.
I used 3x10mm wood screws to attach the bottom plate.
Build log for a larger version of the keyboard: https://blog.jfedor.org/2020/11/dactyl-manuform-build-log.html
QMK fork with configuration and layout for this keyboard: https://github.com/jfedor2/qmk_firmware
Category: Computer