1 / 3
Jeep Gladiator Wheel Center Caps (Aftermarket Wheels) — zdjęcie 1
1 / 3

Jeep Gladiator Wheel Center Caps (Aftermarket Wheels)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I hated the center caps that came with my aftermarket wheels so I am working on these replacements.

Ocena
0 / 5
Polubienia
5
Pobrania
10
Wydruki
0
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

These are center caps for my aftermarket 2022 Jeep Gladiator wheels. I made these to replace the cheap plastic caps that came with the wheels. The have the raised the text “RUBICON” centered on the caps. I printed mine with gold silk filament. I slowed the speed way down on my printer to get even close to a acceptable print. I ended up cutting the speed down by 50% to get the print you see here. I have also added the clip that holds the center cap into the center of the wheel. I used some 15 minute epoxy to cement both parts together. Both parts will need to be scaled to fit into your wheels center bore. Both were printed with PLA+ Esun filaments. I used black for the rear part and gold silk for the cap. I used a black permanent marker to make the “RUBICON” text stand out since I don't have a printer to print this in multiple colors.

I printed the front cap on my FlashForge A5M Pro and the rear part on my AnkerMake 5M printer. Both were printed on textured bed plate. 

One thing, on my FlashForge using Orca Slicer the print comes out better if I used the aligned seam. This way it aligns the seam where it runs off the text on the “N” on RUBICON to the outer edge. Otherwise you may have small ?? pimples ?? at random spots on the outer surface. If you look close at the one photo you will see what I mean. 

Enjoy!

 

Tagi