Thrust Bearing / Lazy Susan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laser Cut a Remote Caddy designed by JKmoule http://www.instructables.com/id/Laser-Cut-Remote-Caddy/ . Showed my wife…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Laser Cut a Remote Caddy designed by JKmoule http://www.instructables.com/id/Laser-Cut-Remote-Caddy/ . Showed my wife and she said:" it would be better if it could spin like a Lazy Susan". That got me thinking, upon searching thingiverse I found some thrust bearings but they were either too big or too small so I made this one weighing in at 100mm in diameter. It uses 6mm air soft bb's for bearings and a M3 screw to hold it together. The use of airsoft bb's was inspired by daMaker's design: https://www.thingiverse.com/thing:2775116 The actual design was inspired by Ratm3at's design: https://www.thingiverse.com/thing:1953369
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10%
Notes:
Easy flat print
Category: DIY