Polymaker Drybox Adapter for Integrated Auto Rewind
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adapter that allows any sub 75mm wide 8mm D shaft rewinder to be installed in a PolyMaker drybox.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I used a few models from @VincentGroenhuis to make the auto rewinder. The issue I had was that I want to use the PolyMaker Drybox system for my spools. This is a simple adapter that allows you to install the Auto Rewind Spool Holder in the DryBox.
You need to take the bearings and rods out of the bottom.
With the PolyBox you need to use the 85mm shaft.
The fit is tight on the D Shaft. Do not push it all the way through. A small drop of superglue will be a big help!
Files for the rewinder
[Integrated Auto-Rewind Spool Holder by VincentGroenhuis - Thingiverse](https://www.thingiverse.com/thing:3781815/files)
[Original Auto-Rewind Spool Holder by VincentGroenhuis - Thingiverse](https://www.thingiverse.com/thing:3200204#google_vignette)