1 / 1
Sovol SV08 nadir hot bed mod sense button spacer — zdjęcie 1

Sovol SV08 nadir hot bed mod sense button spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer frame for raising the stock Z-offset sensor module when using @nadir's heated bed upgrade for Sovol SV08

Ocena
5 / 5
Polubienia
15
Pobrania
94
Wydruki
0
Wyświetlenia
797
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

When you upgrade the stock heated bed in your Sovol SV08 to nadir's upgrade one available on Funssor Lab (do it, it's worth it!), the Z-offset sensor module (the one with a metal button) ends up being way to low due to the upgraded bed's greater height. This model is a spacer that goes underneath the sensor module to fix that.

There are two 3MF file versions available: one for use with 3D printed frame designed by nadir and one without. Both of them assume you use the provided PTFE washers between the bed and aluminium spacers. If you need some custom height due to other variables, there's also a parametrised Fusion file available. You should aim for the “button” being about 0.4 mm proud of the build sheet.

You will need two M3 screws with barrel hex head of either 25 mm length for “with frame” option or 20 mm ones for “without” variant.

I recommend printing with material of at least PETG-level temperature resistance due to proximity of the heated bed. I also advise 3 perimeters (when using 0.4 mm nozzle) to avoid infilling of thin walls. No supports needed.

Tagi