Isuzu D-MAX & MU-X Camera Sensor Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple little setup for those looking to disable the windshield camera sensors on their D-Max or MU-X.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple little setup for those looking to disable the windshield camera sensors on their D-Max or MU-X.
These 3D-printed plates fit into the gap between the sensor housing and the inside of the windshield, blacking out the camera sensor. Once installed, just press and hold the distance button on your steering wheel, and you can switch straight over to non-adaptive cruise control.
You’ll need two of these plates. One for each side of the stereo camera setup. If you only pop one in, sunlight will occasionally overexpose the open sensor and signal to the car to disable all assisted driving functions, including non-adaptive cruise control.
You may need to sand down the friction-fit notch section slightly, to adjust for tolerance. Best to use a UV-resistant filament type.
NOTE: These disable AEB, LKA and adaptive cruise control safety features. They are strictly intended for off-road use, private property, or display purposes only.