Kingdom death settlement location and gear storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combine the settlement location card with the gear cards for a small foldout location and gear storage.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple and easy to make with only a few extra things needed.
- Some 55x55 mm coin sleeves
- Some linen thread
- Super glue
- A needle
First step is to cut the sleeves to the size needed. The Coin sleeves im using is 3x4 so I cut away the side i dont need and end up with a 2x4 and a 1x4 sleeve.
Next up is printing the parts. I printet mine in mat black pla with 0.2mm layer height.
Glue the front and back together. Make sure the holes are aligned correctly for easy assembly. Dont push glue to close the the inner edge, this will make it harder to slide in the settlement card later.
Glue the coin sleeves onto the gear card page. I only add clue along the edges of the sleeves and then press it down the gear card page.
Finally I sew the front and the gear card pages together with the linen thread.
Now add the settlement location card to the front and slide in the gearcards to the sleeves and you have a great option for keeping the gear cards together with each settlement location.