MMU3 collet holder inverted angle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inverted PTFE tube holder for the MMU3.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Hey. Hey,
I made an inverted PTFE tube holder for the MMU3.
The holder has an inverted inlet angle of the PTFE tubes, compared to the original. Which may be useful when specifically placing the MMU in, for example, the side pocket of a Core One printer, instead of the original spool holder. The PTFE tubes will not point towards the printer wall, but away from it. The dimensions are precise the tube will fit just as well as the original.
Print from PETG, or other industrial materials. I recommend a 0.4mm nozzle, 3 perimeters and a minimum of 15% fill.
In time I will post files for the Core One mount and side cover, with the option of sound deadening material used in the automotive industry.
For installation, you need to loosen the two M3 screws and remove the electronics panel to get to the collet holder screws.
!!!BE CAREFUL WHEN HANDLING THE ELECTRICS, BE CAREFUL OF STATIC ELECTRICITY, DO NOT TOUCH THE COMPONENTS OF THE CONTROL BOARD!!!
When removing the PTFE fuses, be extremely careful not to damage or lose them. Be careful when inserting, the fuse legs break very easily.
Any tampering with the MMU is at your own risk!
Please rate the model or make a positive comment if you are satisfied, thank you :-)