Timelapse Test Print ( I did it woooo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a test print I made up to test out a timelapse set up that I had. I spells out the message " I did it Wooooo"
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is a test print I made up to test out a timelapse set up that I had. I spells out the message " I did it Wooooo"
See the timelapse video below for the result.
I referenced the Prusa blog on how to make a timelapse set up, (https://blog.prusaprinters.org/how-to-create-beautiful-3d-print-timelapse-videos_29743/)
but rather than modify the printer in anyway I just used the modified gcode in slicer. I then used a DSLR camera and remote. I modified the remote by adding extra cables across the switch and connected it to a magnetic reed switch. When the print bed magnet moved past the sensor between layers it would take a picture.
This fun test print helped me test out a new set up, as well as try and see if I could spell a secret message inside the print for the viewing pleasure of my audience.