Luxaflex Duette shades lock (Work in Progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lock for Luxaflex Duette shades
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement lock for Luxaflex Duette shades.
The wires of our Duette shades cut through the original lock part.
My apologies for the bad photo's. I already installed the lock and I am hesitant to take it apart just for some photo's :-)
The lock includes a top guide to make it easier to replace (no need to completely disassemble the wires).
The rolpin can be removed by pushing from the bottom with a small screwdriver.
The lock probably needs to be printed in ABS/ASA or PC. PLA and PETG are not able to withstand the friction of the wires and it will need replacing after a month or two. I do not have any ABS, ASA or PC filament, so I am unable to test this. On the other hand, because PLA and PETG will fail, the wires will be allright, and those are a lot harder to replace.
This model requires bed support.
Print, share, remix!