Centauri Carbon HEPA + Active Carbon filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increased the inside height by 0.5cm (5mm) and 1cm (10mm) to fit a 0.5cm thick carbon filter behind the Hepa filter.
- Ocena
- 4,333 / 5
- Polubienia
- 97
- Pobrania
- 586
- Wydruki
- 4
- Wyświetlenia
- 3484
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Uncle Jessy's Hepa filter design that supports carbon filters.
Current versions:
Remix design 1:
- Taller mount/tray to fit a 1cm (10mm) carbon filter behind the Hepa filter in the same tray. To print this version, download all files that contain “remix 1” in their name.
Remix design 2:
- Taller mount/tray to fit a 0.5cm (5mm) carbon filter behind the Hepa filter. To print this version, download all files that contain “remix 2” in their name.
Remix design 3:
- Adjusted mount alongside 2 seperate trays for the carbon filter (designed for 1cm thickness) and Hepa filter. To print this version, download all files that contain “remix 3” in their name.
Remix design 4.1:
Update 25/10/2025:
Replaced Remix 4 with the model 4.1 due to an oversight in the design. Removed the old version for clarity.
- Added a muffler from Mongrel's original design to the 2 tray solution. It uses the same trays as remix 3. To print this version, download all files that contain “remix 4” in their name, including ones that say “remix3&4.”
Link for the hepa filter size that his print uses:
Amazon link
Link to cut-to-fit active carbon sheets that are of 1cm thickness:
Amazon link
The active carbon sheet I picked out is able to be cut to the right size with regular scissors. Any active carbon sheet/mat will do as long as it can be cut.