Waddles with top hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I saw Alsamen's model I was concerned I didn't have enough pink filament left. But having seen many partially…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 453
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
When I saw Alsamen's model I was concerned I didn't have enough pink filament left. But having seen many partially headless prints finished with some type of headwear I figured if it didn't quite finish I could do something like this. Luckily I not only had enough filament to finish a full Waddles, I had enough to make another with a proper hat that even attaches.
I printed the pictured hat with black TPU which is nice and shiny which was lucky because the peg and hole were the same size so it was a tight fit. The included STL for the hat has been given a .5mm expansion so that it fits the peg easier. In the picture he's printed at 50% of original size.
Category: Art