Husqvarna 701 ahead GPS/phone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount AMPS/RAM accessories onto a Husqvarna 701's front mask.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this bracket to create a stiff AMPS mounting point on front of my Husqvarna 701's front mask, as bolting it directly onto the mask without this part resulted in a wobbly mess.
It follows the countours of the mask nicely (what a PITA that was to design), so everything sits flush and nothing moves.
It's intended to be used with AMPS-RAM ball adapter, a RAM arm, and either another AMPS-RAM adapter for mounting a GPS or any other RAM-compatible accessory.
I'm using BajaWorx windshield whose rails add some vertical stiffness to the mask.
If you don't plan on adding a windshield, you may want to reinforce the mask in some other way.
Use some stiff material, ideally something UV-stable capable of sitting in the sun.
I recommend using a wall thickness of 2mm and 40% cubic infill.
The model was designed such that no supports are needed, print on the top face.
Due to the curved geometry, best results are achieved with a low layer height (I used 0.12mm).
Required hardware:
- 4x M5x12 bolts + 4x M5 washers + 4x M5 nuts for the bracket itself
- 4x M4x20 bolts + 8x M4 washers + 4x M4 nuts for Garmin AMPS-RAM adapter
Recommended hardware:
- locknuts instead of nuts
- plastic nut covers (especially for the outer mouting points closest to the brake hose)