Spool Mount Wire Passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Non-destructive method to run wires to the inside of your Centauri Carbon using a spool cap.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 541
- Wydruki
- 7
- Wyświetlenia
- 2639
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update:
Added a new version compatible with the twist and lock spool holder that is included with the CC.
Fixed alignment issue mentioned in comments
Replacement for the stock spool mount with a slot to run wires to the chamber without drilling any holes.
Remix uses an end cap instead of a spool holder for those printing from dry boxes or external rollers. Internal mount is still compatible with the spool holder from the original design. I increased the slot size to work with thicker wires and be compatible with the mini heater power cord in my DIY Heated Chamber Mod.
Filament Companies that Support Me:
SUNLU: PLA/PETG/TPU
Cookiecad: PLA/PETG/TPU/ABS/Silk PLA
Included links are Amazon Affiliate links. If you choose to purchase through these, they will support my projects at no cost to you.