Dust/debris gutter protectors - Unibody, no magnets, lip.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the gutter protectors from dancan13f . I slimmed them down, removed the magnets, add a lip and lever
- Ocena
- 4,889 / 5
- Polubienia
- 22
- Pobrania
- 178
- Wydruki
- 9
- Wyświetlenia
- 740
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever.
Split into objects, flip them on their backs and rotate them 45°. On my CoreOne with PCTG this is still almost impossible to print without stringing, but that's fine! The sections that string fit under the side panels and are hidden (in fact, a little bit helps hold them in place).
I printed these in PCTG 0.2LH, 15% Gyroid.
