Guitar Pick Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A great little guitar-shaped tray to hold your guitar picks so you don't lose them. Includes a fusion 3D and STEP file.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
A great little guitar-shaped tray to hold your guitar picks so you hopefully don't lose them. This tray is carved out of white maple on a DIY CNC router and it took about 5 hours to machine. You could also 3D print it if you like.
About:
- Model Size: (x=121 y=172 z=18)
- Wood used: White Maple, walnut
- Stain used: Red Chestnut 232
- CNC Machine Used: DIY CNC Router
Router bits used:
- A (SPE tools: up-down cut bit) for the adaptive and contour operations.
- A (Genmitsu: R1.0mm ball nose bit) for the finishing parallel-pass operation.
- A (Speed Tiger: ¼in 90° V chamfer bit) for the text engraving.
Useful Info about Fusion 360:
There is a work-around to slow tool path generation, particularly with adaptive tool paths on meshes, I have found that a simple adjustment to the minimum stepdown setting—from 0.0001mm to 0.5mm—can slash generation times from hours down to a mere 4 minutes. This level of resolution isn't typically necessary for adaptive operations, because you will need to do a parallel-pass at the end anyways.