DAS Oculus Quest 2 Front Stock Head Strap Buckle Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fixes an issue I had where there was very little plastic between the inset nut holder and the outside of the…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 633
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
This fixes an issue I had where there was very little plastic between the inset nut holder and the outside of the model causing it to be weak. I also thickened the pieces attaching the cylinder to the main model by 1mm. I made the clip extend 1mm farther back since it was too tight of a fit for my oculus. Lastly, the gap for the DAS buckle was made 1mm wider and the location of the strap attachment was angled up and extended back 1cm to make it a little easier to attach the strap without extensions.
Category: Video Games