Torsion Box T-Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After building a torsion box for my lowrider CNC router I discovered I didn't install enough threaded inserts for hold…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After building a torsion box for my lowrider CNC router I discovered I didn't install enough threaded inserts for hold downs.. these are 3d printable ones threaded for 3/8" -16 bolts (I recommend nylon bolts if you can find them).
These are sized for a 4" thick table. To install drill a 5/8" hole all the way through your table and shove this in from the bottom. Use PETG or better filament with 90% infill for strength.
If you need a different length than 4" do NOT resize these.. the threads will no longer work. You'll need to either edit the object or add a spacer under the table.
Category: DIY