Owl with base (Mice & Mystics)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The owl is divided into three parts to make printing easier without loss of detail.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Instead of the cardboard marker I printed an owl which is mounted onto a base with a 2mm carbon fiber rod.
The owl is divided into three parts to make printing easier without loss of detail. If you would like to download the original owl just look at the original model I remixed.
After gluing I used some filler to make the seams disappear.
The hole for the 2mm rod (~85mm) is not in the printed model, you'll have to drill uit yourself. If requested I can upload a model with the hole but it was so easy to drill so I didn't bother.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
