Geocaching PET preform (PETling) holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder to attach a PET preform to any sort of surface.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a little helper to place PET preforms when creating a geocache.
It includes a version to be screwed down and one to be attached using zipties.
Each version also includes spacers to attach them to posts of 60.3mm or 76.1mm diameter (the most common ones in Germany).
Also, I added files named “Holder-*_PETLock” which will add more space between the base plate and the preform so that you can use the locks I posted here.
Legal notice:
The geocaching logo used in this model is a registered trademark of Groundpeak Inc.
When using this model, please make sure to read and adhere to their Logo Usage Guidelines
Printing instructions:
General
- I would recommend to print it in PETG or ABS for durability
- I chose 5 outer wall loops
Holders
- The holder itself should be printed on its side for stength (I also printed some flat on their base plate to reduce waste when using multi-color printing. These also seem to be fine)
- No supports should be needed here
- make sure your printer is properly calibrated and you have sufficient bed adhesion.
- If it shouldn't properly stick to the print bed, you might want to add a brim
Pole Attachments
- The pole attachments can be printed as they come
- add any kind of supports underneath (on the curved side)