Sunlu Mini Air Purifier Carbon Container/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Refillable carbon container for sunlu air filter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Can't find compatible blocks of carbon for your Sunlu Mini Air Purifier…..problem solved!
Looking for a stand to hold your air purifier in an optimal orientation within your printer enclosure, see here on Printables.
Simply print the 2 parts, fill with acid free carbon pellets, and insert in place of a carbon block.
- Notch on the side of both parts to allow easy joining and ensuring they don't come apart easily
- Uses infill with a top and bottom layer count of 0 to generate a mesh of a similar size to the carbon block
- Adjustable airflow by adding or removing carbon pellets as desired
Recommend to print in PETG or higher temp filament if using within the printer enclosure. I've printed in PETG and had no issues when running hotter chamber temps.
If the parts do not fight tightly together, scale the smaller part up ever so slightly until the fit is snug. If the parts fit too tight, scale the smaller part down until the fit is snug. DO NOT SCALE THE LARGER PART UP as it may no longer fit within the air purifier.