Figbash Articulated Print-in-place Luffy Action Figure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FigBash is a digital action figure kitbash system. Create the action figure of your dreams!
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 276
- Wydruki
- 0
- Wyświetlenia
- 1479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
FigBash is a digital action figure kitbash system. Create the action figure of your dreams by
selecting its features, from hairstyles to clothing! These articulated figures aren't floppy! They can hold a pose and hold weapons.
There are four sizes available:
- 2.75 inches (0.25 mm articulation tolerance)
- 3.75 inches (0.25, 0.30, and 0.35 articulation tolerances)
- 6 inches (0.25, 0.30, and 0.35 articulation tolerances)
- 9 inches (0.25, 0.30, and 0.35 articulation tolerances)
Join the FigBash discord server for access to the beta figure builder program:
You can help future FigBashers by designing and adding your own figure greeblies to the FigBash library.
Instructions for contributing new features can be found on the discord server.
How to print:
- 0.08mm layer height for the 2.75 and 3.75 inch versions. 0.2 for the others
- Wall Loops: 3
- Enable Support
- Support on build plate only!
- Disable Remove small overhangs
- Disable Thick Bridges
- For the 9 inch version, I recommend trying to print an arm, or the hips first to verify that everything will free up for you