Z32 Nissan 300ZX JDM rear plate adapter & hidden battery tender connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your rear plate fit the car without drilling, and add a hidden battery tender connection
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A combination plate adapter bracket and hidden battery tender connector bracket for the rear plate holder of JDM Z32 Nissan 300ZXs. Hooks into the bottom of the plate bracket (remove the plastic caps on the hooks if yours are still present) and bolts to the original Japanese plate holes with 2x M6x16mm countersunk bolts. Bracket is configured for standard US plate bolt holes (2x top and 2x bottom), use M6 bolts of your choice to attach the plate with M6 nuts push-fitted into the backside of the bracket. The bracket is shaped to accept a Noco X-Connect connector for connecting a battery tender behind the plate while leaving the connector invisible when there is not a tender connected, use 4x M5x16 socket head cap screws and 4x M5 hex nuts (push-fitted into the lower bracket) to attach. Compatible with plate frames, but plate fully hides adapter and bracket even without a frame fitted. Highly suggested to print from a UV-stable and heat-resistant filament like ASA.