Wall-Mounted Boosted Board Accessory Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small organizer that I designed to hold the accessories that come with the electric skateboards from Boosted.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small organizer that I designed to hold the accessories that come with the electric skateboards from Boosted. it can be attached to the wall either using screws/nails (the holes are 6mm in diameter), or 3M Command strips, depending on which version you choose.
This organizer holds (left to right):
- The board charging brick
- The board end of the board charging cable (2 slots)
- The remote charging cable (1 slot)
The remote (by the lanyard)
Variations:Large: these files have 90 degree openings in the slots that hold the cables. This one worked for me, but was a bit loose. YMMV.
- Small: these files have 80 degree openings in the slots that hold the cables. I haven't tested this one yet, but it should help if the large files don't hold the cables well enough.
- Holes: these files include 6mm diameter holes so that you can attach the organizer to the wall with nails or screws.Files not labeled with "Holes" are meant to be used with 3M Command strips. I use the Velcro-style ones, but any kind will work.
Print instructions
Category: Organization Print Settings
Printer Brand: Monoprice
Printer: Maker Select
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm
Infill: high