Hictop board case with 2020 rail mounting brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a remix of this great case to add brackets that allow you to bolt it to 2020 rail. If I were to do this again I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Just a remix of this great case to add brackets that allow you to bolt it to 2020 rail.
If I were to do this again I would add a slot beside the USB port.. my board had a card reader there so I wound up dremelling that part of the case out.
Also, you may want to consider thickening the top and bottom sides and the cable minder if printing with PLA.. it's pretty brittle I wound up accidentally breaking pieces and crazy gluing them back on.
Print Settings
Printer:
FLSUN I3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
60%
Notes:
I printed with the open side up but I would do it open side down next time so the rough support is hidden by the interior of the case.
Category: 3D Printer Accessories