Arrma Typhon / Talion Extended Wing Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These super-durable wing mounts allow you to mount larger wings on the Arrma Typhon. Now with M3 nut insert!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
These super-durable wing mounts allow you to mount larger wings (such as the Talion wing) on the Arrma Typhon. This should work on Talion too as p/n is the same.
I wanted to mount the #ARAC9608 wing on my Typhon 6s but it wouldn't fit because the mounting holes are farther back compared to the Typhon wing. So I made this bracket design that keeps mostly stock wing braces and only replaces the two small mounting pivots.
In addition, I've added two additional holes for more downforce and wing options.
There are three versions; standard (same height as stock wing) and 10/15mm versions, which raise the wing vertically by said amount.
Durability I design all the parts I post to be as durable as possible for a 3D printed part. These are no exception. The stock wing bracket mounting piece is about 4mm thick, on this part it is 9mm thick, just enough to be durable, but still allow the Arrma wheelie bar to work like normal. I've done some testing since I installed this part on my Typhon and it seems plenty durable even with just PLA. In fact, I've just updated it to be even thicker and with an M3 nut insert to prevent stripping! However, if you bash really, really hard you might need to use 98A TPU. or PC.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO Centauri Carbon
Resolution:
0.2
Infill:
90
Filament: Priline TPU or Elegoo PLA Plus. Or PC