Blyss A018I-12CH hose adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement adaptor to fit the included or similar hose to the rear of the machine
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This suits the Blyss A018I-12CH but may fit other models with a 150mm exhaust.
I wanted to move my air conditioner from the office to the bedroom for sleeping and didn't want the hassle of moving the hose so I purchased an extra hose and created this adaptor as I couldn't find it for sale anywhere.
This was printed out of HIPS for prototyping purposes but ill need to reprint out of ABS.
Printed on the K2 plus
Print settings:
.2mm layer height
5 wall loops
100% infill
Grid infill
Support on
Placement on build plate:
Place with the flat flange down, this will mean a small amount of support will be created to keep the print level this should ensure the best print
Notes:
This print MUST be printed out of a temperature resistant material a carbon fibre filled ABS or NYLON filament would be suited to this. I'm currently using a HIPS prototype as a test and it has begun to warp.
This would be best printed solid in materials that are on the edge of temperature compatibility such as ABS, Carbon fibre filled NYLON Could be printed with less infill and not creep or warp from the heat.
Created in onshape https://cad.onshape.com/documents/63fc8ae01d3aefd789aa615d/w/01200f5adc74d57c5c9d700a/e/cc40098c02ccb59779ef9297?renderMode=0&uiState=685720ee9bc80b430bce9c4e