FIXED Perfect Gloomhaven Standee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original Gloomhaven standee design by rpgweb. Includes multiple bug fixes and improvements.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original design by rpgweb was very innovative, but had a few design flaws - primarily the “clamp” design that was very hard to assemble and was very easy to break. This remix uses a hexagonal core with a very slight “bite” at the top which allows for an easy to assemble one-way friction fit.
Additionally, the original design had squared off slots on the top to hold the cardboard cutouts. This created sharp seems at the edges, which would damage the cardboard. This design uses rounded shapes to create the slots so the cardboard is much less likely to be damaged.
Last major change was reconfiguring the arm design for the “click” mechanism so that it had similar performance in both the clockwise and counterclockwise direction.
Minor changes include:
- Aligning the numbers on the dial so they are centered correctly in the window
- Updated the “HP” plate with a larger friction fitting
- Added an “S” plate for shields (or whatever special attribute you want to track)
- Made most of the parts slightly thinner
- Made the window slightly larger and added a bevel
All code is available as an OpenSCAD design here: https://github.com/pconwell/3d-models/blob/main/gloomhaven/monster-stands.scad