1 / 3
Truck Bed Divider, No Wobble, for Chevy Colorado (and Most Other) Truck Box / Tonneau — zdjęcie 1
1 / 3

Truck Bed Divider, No Wobble, for Chevy Colorado (and Most Other) Truck Box / Tonneau

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

End pieces for 2x8 or 1x10 lumber as Chevrolet Colorado Truck Bed organizer/divider, with a firm non-floppy fit.

Ocena
5 / 5
Polubienia
63
Pobrania
438
Wydruki
3
Wyświetlenia
2449
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

At this point there have been enough success reports that I think it's safe to say this fits most trucks with fairly wide slots for 2x8" bed dividers. Known good list is below.

I'm sure there is a reason the Chevy Colorado has about ½" of play in the bed divider grooves that appear intended to take a 2x8. But that's a lot of slop. Initially I made ends to hold a 2x8 more firmly. Then I realized for my use case that a lighter thinner 1x10 pine board would work better.

Both parts are available here. Both probably work for other trucks, but that would need to be tested. For the Colorado 2015-2022 model tested, a perfect fit requires a 57 1/16" board, with a 45 degree cut starting 1 3/8" from the bottom corners. (Fit the piece without cut to see what's needed.)

For a perfect fit, cut your board very slightly short… 57" or 56 15/16" and put one end on tight with screws and the other without screws. Then, screw the second end in place right where it needs to be.

If you try these with another truck model, please let me know if (and how well) they work, so I can fill out my list of compatible and incompatible trucks. 
 

COMPATIBLE / INCOMPATIBLE TRUCKS:

Compatible:

  • Chevrolet Colorado & GMC Canyon:

    • 2015–2022 (GMT 31XX)

    • 2023–Present (GMT 31XX-2)

  • Chevrolet Silverado & GMC Sierra 1500 **Without CarbonPro**:

    • 2014–2018 (K2XX) + 2019 LD / Limited

    • 2019–Present (T1XX)

  • Chevrolet Silverado & GMC Sierra 2500HD / 3500HD **Without CarbonPro**:

    • 2015–2019 (K2XX)

    • 2020–Present (T1XX)

  • Ram 1500 **Without RamBox**:

    • 2009–2018 (4th Gen / DS) + 2019–2024 Classic

    • 2019–Present (5th Gen / DT)

  • Ram 2500 / 3500 **Without RamBox**:

    • 2010–Present

  • Ford F-150:

    • 2015–Present (Aluminum body styles use stamped 2-inch vertical channels aft of the wheelhouse)

  • Ford Super Duty (F-250 / F-350):

    • 2017–Present (Shares the F-150 aluminum cab/box stamping profile)

Incompatible:

  • Toyota Tacoma:

    • 2005–Present

  • Toyota Tundra:

    • 2022–Present

  • Ram 1500, 2500 & 3500 with RamBox:

    • 2009–Present

  • GMC Sierra 1500, 2500HD & 3500HD with arbonPro:

    • 2019–Present
       

SUPPORTING YOUR FAVORITE DESIGNERS:

The Amazon links below are affiliate links, and it costs you nothing to use them. If you use an affiliate link to get to Amazon the next time you need to buy something, the designer associated with that link will get a small percentage of any sale made during that browsing session. I hope you'll pick a designer here once in a while to support in this way. Frankly, it tends to be more symbolic than anything, but it lets designers know that you connected with their designs, and it feels good.
 

BOM: 

‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.

 

Tagi