Wingspan - One-Wide Card Tray With Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a single-stack card storage tray for Wingspan. See below for links to other pieces of this box storage set.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This 1-wide card tray is designed to to safely store your cards in the original wingspan box.
The height of the card tray is meant to allow for the presence of 7 player boards (Asia, plus base/Oceana boards) in the box, and still have room for score pads, and various cardboard pieces and rules.
This box is a vestigial box that isn't used in my "Full 8 stack Design" but I am leaving it available for those who don't have 3 expansions and don't need 8 stacks of card storage. See the alternate box layout pictured with this design, featuring a single three wide, a 2 two-wide, and 2 one-wide card holders.
This design was inspired by several different card trays but ultimately I built this one from scratch. I did not care for the many magnet style lids I saw and tried, but loved the utility of the 3-wide tray design that doubles as the face-up card display surface. I decided to go with a slotted lid which provides a very stable platform, even when half open, for the displaying of the face up cards.
The lid is a friction slotted lid, designed to be halfway open during game play, allowing people to draw cards from the tray and have the faceup cards on the top of the lid.
If your lid is fitting too tightly into the tray slot (or not fitting at all) you could shrink the lid vertically and left to right, while leaving the front to back depth the same, so it still matched up to the front-to back dimensions of the tray, but slides in the slot easier.
Printing:
The single stack card tray can be fit on the bed of an A1Mini.
Given the stresses on the friction slot lid, I'd recommend a Basic PLA instead of a more brittle Matt PLA but YMMV.
Other Wingspan Box Organizers:
I have remixed or have made from scratch a full set of Wingspan Box Organizers that are all designed to work together to accommodate the base game, as well as the European, Oceania, and Asian expansion all in the original Wingspan box, and to be stored vertically with no spillage, and to assist and improve table play.
Food Token and Egg Dispenser (includes link to printed birdfeeder this box design uses)
