Tiffen Thick 4x4 inch to 100mm Filter Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount the thick Tiffen 4x4 inch filters on a standard 100mm filter holders, like my Haida M10-II.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Adapter to mount the thick Tiffen 4x4 inch filters on a standard 100mm filter holders, like my Haida M10-II. It works by mounting the filter in front slot of a normal holder, using the front filter slot to hold it.
The Tiffen filters are a true 4x4 inch, or ~101.6mm, and very thick at ~4.3mm (1/6 inch?). The standard 100mm filter size thickness is 2mm. These filter were made for a special Tiffen filter holder.
I went through several iterations that were just too tight after printing, partly because layers shifted a tiny bit when printing in Bambu PETG HF on my A1. In the end I made the fit a bit loose to allow easy insertion of the glass plate and added a thin spacer to take up the slack.
This needs to be printed upright, with painted tree supports for the top bar, as added in the OrcaSlicer 3MF file.
Onshape model: