Modular spices holder for kitchen shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular spices holder for 15cm-deep kitchen shelf
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a 15 centimeters deep kitchen shelf that i use to store spices and other cooking stuff.
As it was really messy, I made a modular support, keeping all the spices in front and other assorted-size stuff in the back.
Max diameter for spices is 5cm. Each module is aprox 22 cm wide and several modules are kept together with a swallowtail pin.
I use 3 modules, but you can use just 2 (both rounded) or more than 3 (the side module needs to be mirrored in slicer, as i made just one stl)
I printed it all with very LOW infill, aprox 5% in PLA.. but i will probably reprint it with some higher infill and stronger material, as the part near the fires is starting to show the PLA limit. The top part also is a bit weak, probably some more layers are the way to go.