1 / 12
W639 Shark Fin Antenna Cover | Haifisch Flosse Antennen Abdeckung — zdjęcie 1
1 / 12

W639 Shark Fin Antenna Cover | Haifisch Flosse Antennen Abdeckung

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover the roof antenna of your W639 viano or vito with this shark fin cover.

Ocena
0 / 5
Polubienia
15
Pobrania
289
Wydruki
0
Wyświetlenia
839
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Shark fin cover for the roof antenna of your W639.
Print using PETG, ABS or similar heat resitant material.

Two verisons are supplied.
1. The regular one with thick walls ment for translucent filament and a recess to hold the Sika Flex glue in place.

2. A filled version prepared for your vase mode experiments with variable wall thickness according to your slicer settings. That one can more easily be glued using double sided tape since you can controll the thickness of the bottom surface with the amount of perimeters.


Remove the cover of the original antenna. The Shark fin will fit around the remaining part and the antenna will remian functional if needed.


Apply Sika Flex or similar car body glue to the recess. In case you opted for the non-vase mode version.



Gently press the Sark Fin into its place and remove access glue.
Apply some weight from above and let it cure for some hours.

 

Tagi