1 / 3
Samsung Buds2 Wireless Charger Holder for Bauhaus Tray System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wireless charger holder for Samsung Buds2 designed to be compatible with the Bauhaus Tray System as a 1x2 module.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on a standard 1x2 Bauhaus tray.
The three components are all press-fit and no hardware is required for assembly. The charger board sits in place with three pegs on the bottom piece and is held down by the top piece. The bottom piece has connector slots on each side except on the side with the USB-C port.
The wireless charger board used was taken from an AT&T 10W Charger: https://www.att.com/buy/accessories/Chargers/att-10w-wireless-charging-pad-plus-charging-cable.html