1 / 5
Holding Plate for HGT Direct Extruder for Anycubic i3 Mega — zdjęcie 1
1 / 5

Holding Plate for HGT Direct Extruder for Anycubic i3 Mega

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holding Plate for HGT Direct Extruder for Anycubic i3 Mega

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to print TPU on my old Anycubic i3 Mega and the bowden system didnt work with that.
This holder allows to directly mount the HGT extruder to the printing head.

You will need some conical head screws for mounting.
The cables between the old bowden extruder and the new extruder need soldering. (In my case I had to switch one color, so that the extruder drives in the correct direction. --> see picture)
Further you will need to recalibrate your extruder stepper driver, since this HGT extruder has a gear ratio in between. (I have something like 703)
--> follow the steps descriped here and it should work fine: https://anycubic-i3-mega.de/infos/extruder-kalibrieren/


If you enjoy this design and it gives you benefit in your life, consider a tiny contribution to my Paypal. It would be well appreciated. :)
--> Paypal.me/KorbiMuster

Tagi