F1 Style Logo Lithophane (Max Verstappen Japan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Formula 1 Style light box (Lithophane) Max Verstappen 2025 (Japan Livery).
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Formula 1 Style light box (Lithophane) Max Verstappen 2025 (Japan Livery). I plan on releasing a bunch of these.
Print the top covers vertically 99% or 100% infill and 0,08 or 0,1 layer height…I only supported the corners hence all the support blockers in the 3mf file.
No support for the boxes, tested on my A1 and K2 Plus.
I used white PLA for the tops and grey for the boxes (any colour will work). I used an LED strip to light it, the holes are there to help you wire it up. I added cooking foil tape as a reflector not sure that’s needed…
Enjoy