1 / 1
Zyxel GS1200-5HPv2 Switch and Power Supply for Multiboard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard mount for a Zyxel GS1200-5HPv2 5 port managed POE switch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Multiboard mount for a Zyxel GS1200-5HPv2 5 port managed POE switch. Parts for both the switch and the power supply. You will need to print two of each.
Printing Guidelines:
I printed using standard Multiboard settings.
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
Supports:
Supports shouldn't be required.
Filament:
I printed this using PETG filament because I mounted mine in the garage. Should print fine with PLA.