Orion Galaxy Men In Black MiB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Galaxia de Orion, colgante del gato de Men In Black. Para imprimir en resina.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Commercial Use
Updated version 4.0
-I print them in resin, flat, without inclination, and without supports on the upper parts.
-The hemispheres (A and B) have a relief etched with the shape of the middle belt (piece C), so they fit snugly without moving when glued. This way, they can be printed without inclination and sanded gently against a flat surface to remove support marks.
-The intermediate piece (C) is 3.2 mm thick. The difference in distance if you sand more or less will be practically imperceptible.
-The ball is normally printed without problems, held only by 6-8 small supports very close together directly at one of its poles (as seen in the photo).
-It is not necessary to use glue for the ball, the hemispheres A and B have axes to hold the ball so it can rotate freely.
-Version 3.0 is the same, but it has the belt (C) integrated into the hemisphere (B).
Life-size at 1:1 scale, exact replica of the film.