2012 Ducati Monster 696 Gauge Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ditch the stock headlight and mount your gauge cluster directly to the bike.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Let me preface this by saying this may work with other year and displacement Ducati but YMMV.
Extra parts you will need
M6 bolts (I did not record the length)
M6 fender washer
Threadlocker
Start by printing the parts.
Note: Use m6 heat inserts on the two holes on the bottom of the mount.
On the bike, remove the old headlight but keep the aluminum bracket that has the two holes in it. Put thread locker on your bolts before you forget!
Create a sandwich with parts as follows. Consult picture two for a closer view of the assembly.
Top
---
- PETG Cluster Mount
- TPU Isolator 1 (the smaller side of the isolator goes down into the aluminum mount)
- Aluminum bracket
- TPU Isolator 2
- PETG washer
- M6 fender washer
- M6 Nut
---
Bottom
Torque everything up and you're done. You may have to finagle the mount a bit as the cover that goes on the back of the gauge cluster may interfere a smidge.