Tall Pot Lid Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tall replacement handle for pot lids that doesn't use any of the original hardware.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like any of the designs available for 3D printable pot lid handles, so I designed my own. It's tall and rounded so you can get a very good grip on it, and printed upside down so you get a lot of strength with a contour at the bottom to fit large or small pot lids.
Additional hardware required:
-M5 nut
-30mm or longer M5 screw/bolt
Print at 0.2 layer height, use a pause script to stop the print and insert a nut into the cavity before resuming the print. Also place a bit of heatshrink tube around the 30mm+ M5 screw you decide to use, where the threads meet the glass, to avoid damaging it.