TACTI-SHELL Airsoft / 12ga Shotshell Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 231
- Wydruki
- 1
- Wyświetlenia
- 863
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
INTRODUCING THE TACTI-SHELL
FOR ALL YOUR SHELL HOLDING NEEDS
Three pieces, print and glue together. Holds 4 shells, which can be oriented either direction based on preference.
Designed to prevent shells from falling out while playing airsoft, even if partially full -- a problem that plagues bandoliers or pouches.
See zipped folder for experimental 12 gauge model. Not guaranteed to fit all brands. Special thanks to AWZ1287 for dimensions and testing!
PLEASE NOTE: This is based on a shell holder I saw some time ago in a picture, but modified to be 3D printed and used for airsoft. I do not claim this as my own design, however it is significantly different from what I remember of the original.
This design took over ten prototypes and nineteen unique revisions to reach its current state, and I'm very happy with its performance. There are some aspects I plan to change in the future, and I am open to suggestions for improvement!