1 / 2
Nordic Ski Waxing profile - Print in Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waxing profile will automatically adjust to the angle you need to support your skis. Prints in place with no support.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
The second version of the ski waxing profile. I was able to print this without supports and get a decent result. I used PETG but PLA might be able to be used with a little more success. Prints in place and with no assembly required. The hinge is a good fit for my printer but if its too tight even after rotating it a few times you may need to play around with the tolerance.