Parametric panel mount with front plate for USB extension cords
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Socket to mount USB extension cords behind a panel/front plate. The model is designed in FreeCAD and fully parametrized.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this model to mount a USB-A socket behind a front plate.
The model is fully parametrized to adapt the dimensions to the USB extension at hand and such provide optimal fit. The screw and nut sizes can be adjusted as well as the wall thickness if additional durability is needed. All parameters and tolerances can be configured in the embedded table 'params'.
The front plate provides a clean look even if the cut-out for the USB plug is not exact.
The exported files use M3 screws and nuts that can be pressed into the back part.