1 / 1
16mm PVC T-fitting for FPV whoop gates — zdjęcie 1

16mm PVC T-fitting for FPV whoop gates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fittings to help build whoop gates using electrical PVC conduit pipes with an outer diameter of 16mm.

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I'm participating in #igow5, and challenge #2 needs some whoop gates. I had none, but I found some 16mm PVC pipes in my local Byggmax for about 2 EUR per 2 meter. Cut them to size and combine them with these T-fittings and you can build yourself a few gates.
 

Hexagons because they are the bestagons.

Designed in FreeCAD v1.0.1 using parametric modeling for flexibility.

I've printed these with ASA using a 0.4mm nozzle at 0.2mm layer height. ASA does shrink a bit, so it's possible that other filaments might have a looser fit.

Tagi