1 / 2
1:10 Fine focus add-on for Hadley non-rotating focuser — zdjęcie 1
1 / 2

1:10 Fine focus add-on for Hadley non-rotating focuser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fine focus add-on for the non-rotating focuser for a Hadley telescope.

Ocena
0 / 5
Polubienia
5
Pobrania
51
Wydruki
0
Wyświetlenia
306
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to experiment with a way to focus Hadley more precisely, so I have created this fine focus assembly that can be added onto the 1.25" focuser remixed by @wigglememore. Note: this was modeled using the latest version (v2 at the time of writing). 

My print settings:
0.6mm nozzle
0.3mm layer height in PLA
15% infill (i prefer gyroid)
Concentric top and bottom surfaces on the round bits.
And to make it look slightly less crappy I added some jitter to the walls of the base.

If you assemble it using the exploded view as a guide, this should be pretty self explanatory. The fine focus gear + knob snap in place quite satisfyingly. If you use the print orientation as suggested you will not need any support for the base. 

And a reminder: make sure your telescope is horizontal when you work on the focuser, so if you drop a bolt or nut you will not ruin your primary mirror. That would suck.

Hardware I used:
1x M4x50 hex head bolt
2x M4x12 socket head cap screw (these replace 2 of the M4x8 socket head cap screws if you already have the focuser.

From the original model you will need to print the lock ring. 

To fit this onto your existing focuser you will need to gently remove the existing focus wheel from the glued lock ring, to be able to remove it from the focuser assembly. If that doesn't work you might have to reprint the main focuser body from the linked model. 

It works pretty smoothly for me - if it doesn't for you, feel free to modify it. And if you get tired of it, it is easily removed, just keep the course focus gear as your main focus wheel for an industrial look :)