Reusable NFC Tag Clip for Sunlu Filament Spools (Anycubic ACE Compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on NFC tag holder for Sunlu spools – reusable, glue-free, ACE Pro compatible
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 318
- Wydruki
- 2
- Wyświetlenia
- 2003
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reusable NFC Tag Clip for Sunlu Filament Spools (Anycubic ACE Compatible)
(If you search a Clip for Sunlu Reusable Spools, take a look at Snap-In Label Chip by Isaac)
This clip allows you to easily attach NFC tags to Sunlu filament spools without glue – perfect for printers with the Anycubic ACE Pro system such as the Kobra 3 Max.
As the readers for the tags are installed twice on the left and twice on the right in the Ace Pro, two clips should be installed per spool.
🔹 Compatible with NTAG213 / 215 / 216 (25 mm diameter recommended)
🔹 No adhesive required – just clip it onto the spool
🔹 Reusable – great for refills and custom filament
🔹 Use two clips per spool
🔹 Requires less than 2 g of filament per clip – ideal for leftovers!
Tags can be written using the open-source project by Molodos (https://github.com/Molodos/anycubic-nfc-filament), allowing you to store material type, color, weight and more. The ACE Pro reads this data automatically – no app or cloud required.
🛠 Print settings:
Material: PLA or PETG
No supports required
15–25 % infill
Quick print – just a few minutes per clip
💡 Tip:
Pair with a USB NFC reader and the Python tool from Molodos (https://github.com/Molodos/anycubic-nfc-filament) to write your own reusable tags in seconds.
---------------------------------------------
Wiederverwendbarer NFC-Tag Clip für Sunlu-Filamentspulen (Anycubic ACE kompatibel)
Dieser Clip wurde speziell für Sunlu-Filamentspulen entwickelt, um NFC-Tags sicher, wiederverwendbar und ohne Kleber anzubringen - perfekt für Drucker mit Anycubic ACE Pro-System wie den Kobra 3 Max.
Da im Ace Pro die Leser für die Tags zweimal links und zweimal rechts verbaut sind, sollten zwei Clips pro Spule verbaut werden.
🔹 Kompatibel mit NTAG213 / 215 / 216 (Ø 25mm empfohlen)
🔹 Kein Kleben - einfach an die Spule klipsen
🔹 Wiederverwendbar - ideal für Refill und eigenes Filament
🔹 Pro Spule sollten zwei Clips verwendet werden
🔹 Jeder Clip benötigt weniger als 2g Filament - perfekt für Reste!
Die NFC-Tags lassen sich mit dem Open-Source-Projekt von Molodos am PC beschreiben. So kannst du das Material, die Farbe, das Gewicht und weitere Daten direkt am Drucker auslesen lassen - ganz ohne App oder Cloud.
🛠 Druckhinweise:
Material: PLA, PETG (kein Support nötig)
Infill: 15-25%
Druckzeit: ca. 6min pro Clip
💡 Tipp:
Zusammen mit einem USB-NFC-Leser und dem Python-Tool unter https://github.com/Molodos/anycubic-nfc-filament kannst du deine Tags bequem selbst beschreiben und jederzeit wiederverwenden.
