M12 Detail Sander Sandpaper Cutting Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your own sanding sheets for the M12 Detail Sander from 6" sandpaper disks!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade your Milwaukee M12 Detail Sander with this 3D printed sandpaper cutting jig, designed to save time and cut costs. This works with the M12 Orbital Detail Sander (2531-20) and allows you to cut standard 6" hook and loop sandpaper sheets into perfectly sized sheets for your sander—eliminating the need for the expensive Milwaukee branded sheets. You can also use 5" disks but will only be able to fit one sheet on each disk.
This design has two slots down the middle which allow you to partially cut the two sheets apart. Once done using the jig, simply cut the 3/4" web between two sheets! Other designs you can buy, make you freehand cut the two sheets in half down the center.
Sandpaper Pricing Comparison*
| Sandpaper: | Cost: |
| Milwaukee 120 Grit (Home Depot) | $0.98 per Sheet |
| 3M™ 710W Xtract™ 120 Grit (Taylor Toolworks) | $.55 per Sheet |
*Prices as of 6/23/2025