Elegoo Centauri Carbon Squash Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti Vibration Squash Ball Feet for the Elegoo Centuari Carbon.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 813
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I failed to order the Anti-vibration feet when I pre-ordered the Centauri Carbon, thinking it would be fine. Then I saw it in action on a particularly fast part. The thing nearly walked off my small cabinet.
“Can't have that,” I thought. I searched Printables for some anti-vibration feet and pulled the squash balls off my old ender3. I found a set of feet for the X1C, and seeing as how the CC is a clone of the X1C, I thought it fitting to clone these feet as well.
It does lift the machine off the bench, and I went ahead and reran the self calibrations. I don't know if that's necessary, but I figured it wouldn't hurt. It runs much smoother and has much less dance in it's soul now.
I went ahead and printed these with 100% infill and staggered layer lines. Probably overkill, but it's a load bearing part and I don't want to have to replace them. There's not a lot of dead space for infill inside the model anyway, so it's not much of a waste of plastic.