1 / 2
Art déco Ender-3 PSU cover | 92mm fan — zdjęcie 1
1 / 2

Art déco Ender-3 PSU cover | 92mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PSU cover for Ender-3, designed to house a 92mm fan.

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Parts required

  • 4x m3x25 (or shorter) screws
  • 4x m3 nuts
  • 92mm DC fan
  • optional: step-up/step-down DC-DC module 
    (in case the fan you're about to adapt isn't 12v)

Assembly

  1. Unplug the printer 
  2. Unscrew the original cover
  3. Remove the original fan
  4. Screw in the new one (with the m4 screws and nuts) to the printed cover
  5. Connect the fan 
    (might require a DC-DC power step-up/step-down module, make sure the voltage matches)
  6. Install the new cover and screw it in with the original screws

Tagi