1 / 3
Samsung Galaxy Watch 7, 6, 5 Monitor charging Dock — zdjęcie 1
1 / 3

Samsung Galaxy Watch 7, 6, 5 Monitor charging Dock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A under monitor mount for charging your galaxy watch. The best way to keep your desk cable and clutter-free.

Ocena
5 / 5
Polubienia
36
Pobrania
244
Wydruki
4
Wyświetlenia
1169
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Samsung Galaxy Watch Monitor Charger Holder (Watch 7 / 6 / 5)
Clean and simple holder for the original Samsung charging puck. Designed to be mounted on your desks monitor. Specifically for Galaxy Watch 7, 6, and 5.

🛠 Design & Fit

This holder is made to fit the official Samsung charger perfectly – third-party pucks won’t fit. The puck snaps in tightly and stays in place thanks to the stiff cable end pressing against the back wall. 

The model is fully support-free and prints best flat on its large backside. Thanks to the wide contact surface, no brim or adhesion helpers are needed. 

🖨 Print Settings (tested)

Material: PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Supports: none
Infill: 15%
Orientation: back side down on the build plate

🧲 Mounting

The holder can be attached to your monitor using double-sided tape – as shown in the photos.

Tagi